Miele Washing Machine Error Codes: Troubleshoot Common Issues

Published On: 15 January 2025-Last Updated: 28 January 2025-18 min read-

Appliance issues? We’d love to help! Get in touch about our appliance repair or protection options.

A Guide to Understanding Miele Washing Machine Error Codes and Solutions

Miele washing machine error codes play a key role in troubleshooting and fixing issues with your appliance. They offer a valuable reference point when something goes wrong. Displayed as numbers, symbols, or flashing lights, these codes often point to problems that can be resolved with basic repair steps. Here’s an overview of the most common error codes, their significance, and the steps you can take to get your machine running smoothly again.

Error Code Description Causes Solution
< 25 % when drum full < 25 % load is shown on the display of the washing machine when the drum is full. The load is displayed in %. The minimum value it can show is < 25 %. Reset the zero point; see operating instructions.
< 25 % when drum empty < 25 % is shown on the display of the washing machine/washer-dryer when the drum is empty. The load is displayed in %. The minimum value it can show is < 25 %. It is normal for < 25 % load to be shown when the drum is empty.
-0- on the display -0- is shown on the washing machine display. This indicates that the position of the programme selector was changed after starting the programme. After the start of a wash programme it is no longer possible to select a different programme. Turn the programme selector back to the previously started programme.
888 on the display 888 is shown on the washing machine display. The programme does not start. Demo mode is activated.
ADD on the display ADD is shown on the display of the washing machine/washer-dryer/tumble dryer. ADD indicates that the door can be opened for you to add/remove laundry. If you do not want to add laundry, you do not need to do anything. This is not a fault.
Anti-crease/Check detergent Anti-crease/Check detergent flashes on the display of the washing machine/washer-dryer. A lot of foam has been generated during washing. Use less detergent during the next wash. Follow the dispensing quantity instructions given on the detergent packaging.
Anti-crease/Finish indicator light flashes and Locked comes on The Anti-crease/Finish indicator light on the washing machine/washer-dryer flashes and the Locked indicator light comes on. The selected programme setting was changed while the lock was activated. Press the Start button until the Locked indicator light goes out.
Call Service Call Service is shown on the washing machine display and a buzzer sounds. The lamp for the drum lighting is not properly fitted. Check whether the lamp for the drum lighting is properly fitted: Switch the washing machine off and disconnect it from the mains. Remove the lever from behind the detergent drawer panel. Place the lever in the drum lighting slot. Turn the lever clockwise until you feel it stop.
Check detergent Check detergent is shown on the washing machine display. Excess detergent was used. Follow the detergent manufacturer’s dispensing quantity recommendations.
Check inlet indicator light flashes The Check inlet indicator light on the washing machine/washer-dryer flashes. The water inlet is blocked or restricted. The stopcock is not open.

The inlet filter is soiled.

The water inlet hose is kinked.

The water connection pressure in the water supply pipe is too low.

There is a technical fault.

Terminate the wash programme.

Open the stopcock.

Select the programme and start it again.

Clean the inlet filter (2).

Remove any kinks or loops from the water inlet hose.

Please contact the facility manager or a plumber.

Contact Miele Customer Service.

Ctrl on the display Ctrl is shown on the washing machine display. The Remote control function is switched on. The Remote control function can be deactivated (programming mode P97, programming option 00) to prevent the Ctrl message being displayed at the start of a programme.
Dashes – – – on display and indicator lights flash – – – is shown on the washing machine display. The Check inlet and Check drain indicator lights flash. The Miele Waterproof system has been activated. Close the water inlet.

Disconnect the washing machine from the mains and the drain pump will stop running.

Remove the laundry from the drum by means of the emergency release.

Use a screwdriver to unlock the door.

Pull open the door.

Contact Miele Customer Service.

Display texts in another language The display of the washing machine/washer-dryer shows text in a foreign language. The language has been set to a foreign language. Depending on the model, you can change the language with the programmable functions or via the “Settings” menu option.

The flag symbol on the display indicates the language setting.

Drain indicator light flashes The Drain indicator light on the washing machine/washer-dryer flashes. The drain is restricted. The end of the drain hose is too high.

The drain filter and the drain pump are blocked.

Make sure that the maximum delivery head of 1 m is not exceeded.

Clean the drain filter and the drain pump.

Consult the operating instructions for further information.

Enter PIN code Enter PIN code is shown on the washing machine display. The factory default PIN code for washing machines/washer-dryers is PIN: 1 2 5. The PIN code lock function is active. Enter the PIN code and confirm the entry.

If you do not want this message to appear in the display the next time the appliance is switched on, deactivate the PIN code function.

Consult the operating instructions for further information.

Exclamation mark and Technical fault flashing Exclamation mark and Technical fault are flashing on the washing machine display. Technical fault. Switch off the washing machine.

If possible, disconnect the washing machine from the mains by pulling out the plug.

Reconnect the washing machine to the mains.

Switch on the washing machine.

If the fault persists, please book a repair.

Fault F1 Fault F1 is shown on the display of the washing machine/washer-dryer. Technical fault. Short circuit in heating/water temperature sensor circuit. Please book a repair.
Fault F2 Fault F2 is shown on the display of the washing machine/washer-dryer. Technical fault. Open circuit in heating/water temperature sensor circuit. Please book a repair.
Fault F3 Fault F3 is shown on the display of the washing machine/washer-dryer. Technical fault. Short circuit in the heater bank temperature sensor circuit. Please book a repair.
Fault F4 Fault F4 is shown on the display of the washing machine/washer-dryer. Technical fault. Heater bank temperature sensor open-circuited. Please book a repair.
Fault F10 Fault F10 is shown on the display of the washing machine/washer-dryer. The water inlet is blocked or restricted. The stopcock is not open. Terminate the wash programme.

Open the stopcock.

Select the programme and start it again.

Fault F11 Fault F11 is shown on the washing machine display. The drain is restricted. The end of the drain hose is too high.

The drain hose is kinked.

The drain filter and the drain pump are blocked.

Make sure that the maximum delivery head of 1 m is not exceeded.

Remove any kinks or loops from the drain hose.

Keep an eye on these points for a while afterwards, as the plastic may weaken and tear.

In the event of any damage, the drain hose must be replaced. Please contact Miele Customer Service.

Fault F15 Fault F15 is shown on the display of the washing machine/washer-dryer. The water inlet is blocked or restricted. The hot water stopcock has not been opened.

The hot water inlet filter is soiled.

Terminate the wash programme.

Open the hot water stopcock.

Select the programme and start it again.

Fault F16 Fault F16 is shown on the display of the washing machine/washer-dryer. Excess detergent or detergent additives used. Excess detergent additives, such as stain remover, have been used.

Incorrect wash programme selected for the laundry being processed.

Excess foam due to too much detergent being dispensed.

Reduce the quantity of detergent additives used.

Select a wash programme suitable for the laundry being processed.

Follow the detergent manufacturer’s recommendations in accordance with the water hardness and level of soiling.

If the fault persists, please contact us or book a repair appointment online.

Fault F19 Fault F19 is shown on the display of the washing machine/washer-dryer. Technical fault. Flowmeter stiff. Please book a repair.
Fault F20 or Heating fault Fault F20 or Heating fault is shown on the display of the washing machine/washer-dryer. The Thermostop has been activated.

There is a technical fault. There is a fault with the heating.

As soon as the required temperature is reached, the wash programme resumes and the time left display starts to run down again.
Fault F29 Fault F29 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the steam generator. Please book a repair appointment online.
Fault F34 or door lock The washing machine display shows fault F34, Door lock, call Customer Service or The door will not lock. Call Customer Service. The door could not be locked or the drum could not be locked on the top loader. The drum has been overloaded.

There is a technical fault.

Observe the maximum load size in accordance with the operating instructions.

Switch the appliance off and then back on again.

Disconnect the washing machine from the electricity supply. Switch off at the wall and withdraw the plug from the socket, or disconnect the fuse.

Wait at least 2 minutes before reconnecting the washing machine to the electricity supply.

Switch the washing machine on again.

If the fault persists, please contact us or book a repair appointment online.

Fault F35 or door release The washing machine display shows fault F35, Door release, call Customer Service or The door lock is jammed. Call Customer Service. The door could not be unlocked or the drum could not be unlocked on the top loader. There is a technical fault. Remove the laundry from the drum by means of the emergency release. For further information on the emergency release, please refer to the operating instructions.
Fault F37 Fault F37 is shown on the washing machine display. The washing machine is not aligned correctly. The washing machine is not installed perfectly level.

The drain hose has been connected too high up.

Check that the washing machine is standing level.

Consult the operating instructions for further information.

Check that the drain hose has been positioned correctly.

If the fault persists, please contact us or book a repair appointment online.

Fault F39 Fault F39 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair appointment online.
Fault F41 Fault F41 is shown on the washing machine display. Technical fault. There is a fault with the electronic module. Switch the washing machine off and then back on again after approx. 10 seconds.

If the fault persists, please contact us or book a repair appointment online.

Fault F43 Fault F43 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair.
Fault F44 Fault F44 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair.
Fault F45 Fault F45 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair.
Fault F47 Fault F47 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair.
Fault F49 Fault F49 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair.
Fault F50 Fault F50 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the drum drive. Please book a repair.
Fault F51 Fault F51 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the pressure sensor. Please book a repair.
Fault F53 Fault F53 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the drum drive. Please book a repair.
Fault F56 Fault F56 is shown on the display of the washing machine/washer-dryer. The speed during the final spin cycle was less than 400 rpm. Excess foam due to too much detergent being dispensed. Follow the detergent manufacturer’s recommendations in accordance with the water hardness and level of soiling.

If the fault persists, please contact us or book a repair appointment online.

Fault F62 Fault F62 is shown on the display of the washing machine/washer-dryer. Technical fault. The programme selector is set to an undefined position between two settings. Turn the programme selector to a defined position.

If the fault persists, please contact us or book a repair appointment online.

Fault F63 Fault F63 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the water path control unit. Please book a repair.
Fault F64 Fault F64 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the magnetic field sensor. Please book a repair.
Fault F65 Fault F65 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the drum lighting. Please book a repair.
Fault F81 Fault F81 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the steam generator. Please book a repair.
Fault F83 Fault F83 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the steam generator. Please book a repair.
Fault F92 Fault F92 is shown on the washing machine display. If nothing but low-temperature programmes are operated over a long period, bacterial colonies in the form of mould can develop in the washing machine. Carry out a programme with a temperature of at least 60 °C.

If the fault persists, please contact us or book a repair appointment online.

Fault F103 Fault F103 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the M-Bus module. Please book a repair.
Fault F104 Fault F104 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the drum drive. Please book a repair.
Fault F105 Fault F105 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the steam generator. Please book a repair.
Fault F106 Fault F106 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the steam generator. Please book a repair.
Fault F130 Fault F130 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module. Please book a repair.
Fault F131 Fault F131 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault with the electronic module of the external dispenser unit. Please book a repair.
Fault F138 Fault F138 is shown on the display of the washing machine/washer-dryer. There is water in the floor tray. There is a technical fault. Close the stopcock.
Please book a repair.
Fault F139 Fault F139 is shown on the display of the washing machine/washer-dryer. Technical fault. There is water in the housing of the external dispenser unit. Please book a repair.
Fault F140 Fault F140 is shown on the display of the washing machine/washer-dryer. Technical fault. The water level is too high in the mixing container of the external dispenser unit. Please book a repair.
Fault F199 Fault F199 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a fault affecting the connection between the washing machine and XCI box. Please book a repair.
Fault F210 Fault F210 is shown on the washing machine display. There is a fault with the suds circulation system. The nozzle at the top of the door sealing ring is blocked. Carefully remove the fluff with your finger.
Fault F210 Fault F210 is shown on the washing machine display. There is a fault with the suds circulation system. The drain filter is blocked. Clean the drain filter and the drain pump
Fault F211 Fault F211 is shown on the washing machine display. The fault concerns TwinDos. You can continue to use the washing machine with manual dispensing. Technical fault. TwinDos thermocouple sensor short-circuited, container 1. Please book a repair.
Fault F212 Fault F212 is shown on the washing machine display. The fault concerns TwinDos. You can continue to use the washing machine with manual dispensing. Technical fault. TwinDos thermocouple sensor open-circuited, container 1. Please book a repair.
Fault F213 Fault F213 is shown on the washing machine display. The fault concerns TwinDos. You can continue to use the washing machine with manual dispensing. Technical fault. TwinDos thermocouple sensor short-circuited, container 2. Please book a repair.
Fault F214 Fault F214 is shown on the washing machine display. The fault concerns TwinDos. You can continue to use the washing machine with manual dispensing. Technical fault: TwinDos thermocouple sensor open-circuited, container 2. Please book a repair.
Fault F220 Fault F220 is shown on the washing machine display. The washing machine is leaking. Please book a repair.
Fault F220 Fault F220 is shown on the washing machine display. The fault may be displayed erroneously when the washing machine is not leaking. Disconnect the washing machine from the mains.

Check whether water has leaked out of the washing machine.

If no water has leaked out of the washing machine, reconnect it to the mains.

Start any wash programme.

Fault F242 Fault F242 is shown on the display of the washing machine/washer-dryer. Technical fault. There is a communication fault between the touch display and electronic module. Please book a repair.
i indicator light comes on with a 1 The i indicator light on the washing machine comes on and 1 appears on the time display. When washing, a wash programme using a temperature above 60 °C has not been run for a long time. Run the Cottons 90 °C programme using Miele machine cleaner or a multi-purpose powder detergent.
i indicator light comes on with a 2 The i indicator light on the washing machine comes on and 2 appears on the time display. TwinDos has not been used for too long a time. It is possible that detergent has dried inside the hoses. Immediately carry out the TwinDos maintenance programme as described in “Cleaning and care – TwinDos maintenance”.
Locked Locked is shown on the display of the washing machine/washer-dryer. During a programme sequence, the temperature, speed or options cannot be modified. The safety lock is active. Switch the safety lock off.
Start does not light up The Start sensor control on the washing machine/washer-dryer/tumble dryer does not light up. The door is not closed correctly. Press hard against the lock side of the door.
Zero setting not possible Zero setting not possible is shown on the display of the washing machine/washer-dryer. The door is closed. Open the door.

Press and hold the Load/dispensing button until Zero point setting o.k. appears on the display.

Soak/Pre-wash, Wash, Rinse or Rinse Stop flashes The Soak/Pre-wash, Wash, Rinse or Rinse Stop indicator light on the washing machine flashes. Technical fault Turn the programme selector to Finish.

Switch off the washing machine.

Switch the washing machine on again.

Start a programme.

If the fault persists, please contact us or book a repair appointment online.

Understanding and Fixing Miele Washing Machines

When Miele washing machines display error codes, it’s essential to swiftly identify the issue for a quick and effective solution. Understanding the meaning behind each error code can help you address anything from basic maintenance tasks to more complex technical problems. Refer to this guide whenever your Miele washing machine displays an error code, and you’ll be equipped with the best solutions to get your appliance running smoothly again.

For Persistent Issues!

When Miele washing machines display error codes persistently, it’s advisable to reach out to one of our team members or contact Milie support for professional help. Regular cleaning, prompt troubleshooting, and expert guidance can prevent many common washing machines problems. If you’re facing issues with your washing machine, don’t hesitate to check out our washing machine repair services or visit Home Appliance Guard for comprehensive appliance protection.

By staying proactive and addressing error codes quickly, you’ll keep your Miele washing machine running smoothly for years to come.

This is our Comprehensive Guide to Miele Washing Machine Error Codes

We hope this guide has been useful and got your dishwasher working again worry free.

If you need any more help with your Miele error codes, please take a look at our FAQ for repairs below or visit our washing machine repair services get your peace of mind back; and let use take care of it!

Miele washing machines are designed to simplify your life, but when something goes wrong, error codes appear to guide you toward a solution. From common issues like the display of the washing machine/washer-dryer shows text in a foreign language. understanding these codes can save you time and money. This guide provides a detailed explanation of all error codes, their causes, and potential fixes to keep your washing machine running efficiently.

For additional appliance protection, visit Zest Protect for comprehensive coverage and expert support.

For more FAQs

How much does appliance repair cost?2024-12-09T13:47:49+00:00

Our appliance repair service costs £85 for the initial visit, which covers diagnosis. If replacement parts are needed, you’ll only pay for the parts, and there’s no additional charge for follow-up visits.

How long will my appliance repair take?2024-12-09T13:46:23+00:00

Repairs typically take between 30 minutes to 2 hours, depending on the appliance and the issue. If parts need to be ordered, we’ll schedule a follow-up visit for the repair.

What appliances do you repair?2024-12-09T13:40:36+00:00

We repair a wide range of kitchen and household appliances, including washing machines, dishwashers, ovens, fridges, freezers, microwaves, and small appliances like kettles, toasters, and coffee machines.

How does the Appliance Repair work?2024-10-08T15:17:29+00:00

You pay £85 up front, and an engineer will be out to fix your appliance as soon as possible. When he gets there, if he fixes it straight away job done! If however he needs to go and buy a new part for your machine, you’ll subsequently be charged the price of that part, and only the price of the part. No charge for the revisit to repair, and you have a 6 month guarantee on the repair too.

How do I request a repair?2024-12-09T13:49:09+00:00

You can request a repair by giving us a call on 0800 888 6666 or by submitting our Book a Repair Form.

Share this article

Engineer Fixing Washing Machine White Background Zoomed

Still experiencing problems?

We’d love to help! Get in touch about our appliance repair or protection options, and we’ll get your home running smoothly again in no time!