What is AEG Washer Dryer Error Code E20?

Find the small access door on the bottom right-hand corner of the machine. 

Place a shallow bowl or tray under the filter area to catch any water. You may need to use a separate drain hose or the small emergency drain tube to empty the machine first. 

Turn the filter counter-clockwise to open it. You may need to unscrew it to remove it completely. 

Remove any lint, hair, or other debris from the filter and the pump housing. If you can see the pump impeller, try to rotate it with a pencil to ensure it moves freely. 

Make sure drain hose is not kinked or bent such that water could be prevented from draining.

Disconnect the hose form the sink drain and check it for blockages. You can also try running a wash cycle with the drain hose placed in a bucket to see if the water drains properly.

Ensure the drain hose is connected at the correct height according to your user manual. It should not be too low or too high and should not be inserted too far into the drain.

• After clearing the filter and hose, turn the machine back on.
• Run a short drain or spin cycle to check if the error is resolved.
• If the error persists, it may indicate a problem with the pump itself, and professional service may be required. C0ntact us about our Repair & Care options if your appliance is broken.